AGG Software
Ask a question  Top  Previous  Next

Real world example

This real world example describes a machine that has a probe to measure components after they have been machined.

 

The machine has a 25 pin RS232 port which we have connected to a laptop using a 9 pin RS232, and have been able to receive data.

 

You will need DNC Precision with machine monitor function enabled. The input/output port setting on the SETTINGS page of OFFSETS key will need to be set to 0 (zero) to point output to the RS232.

 

Type and start the demo program below. Don’t forget POPEN and PCLOS top AND BOTTOM.

 

%

O1919(DPRINT TEST)

#4=4444.

#5=5555.

#18=18.18

#1=111.1

#25=25.25

#28=28.28

#29=29.29

#137=137.137

#138=138.138

#139=139.139

#143=143.143

POPEN

DPRNT[(***COMPONENT=#121[60]***)]

DPRNT[(***FEATURE=#122[40]***)]

DPRNT[(***PCDFEATURE=#147[30]***)]

DPRNT[(***INCX=#4[44]***)]

DPRNT[(***ACTUALX=#28[44]***)]

DPRNT[(***INCY=#5[44]***)]

DPRNT[(***ACTUALY=#29[44]***)]

DPRNT[(***PCD=#18[44]***)]

DPRNT[(***ACTUALPCD=#137[44]***)]

DPRNT[(***DEVPCD=#142[34]***)]

DPRNT[(***ANG=#1[44]***)]

DPRNT[(***ACTUALANG=#139[44]***)]

DPRNT[(***DEVANG=#144[34]***)]

DPRNT[(***SIZEY=#25[44]***)]

DPRNT[(***ACTUALSIZE=#138[44]***)]

DPRNT[(***TOL=#11[24]***)]

DPRNT[(***DEVSIZE=#143[34]***)]

PCLOS

M30

%




Copyright © 1999-2016, AGG Software.
All rights reserved.