NEC Univerge SV8100. SMDR/CDR data format and connection settings
This data is being extracted with help of the "Advanced PBX Data Logger" software only. It may not applicable for other software titles.
PROG 10-12-01/02: confirm your IP address given for the CPU
PROG 35-01-01: Output Port Type (select: LAN)
PROG 10-20-05: SMDR Output Port (input: 60010)
PROG 14-01-06: SMDR Print-Out (checked)
Repeat for all the trunks necessary
Call logging via LAN
- Open your favorite browser.
- Navigate to the http://192.168.1.220/ (replace the IP address with the address of your PBX)
- Login using the installer name and password (by default: sltech/12345678).
- Change the settings below.
- Apply the changed settings.
Note 1: The SMDR format (35-01-08) depends on the selected parser type (PBX Data Logger - Configuration - Modules - Parser)
Note 2: The SMDR date format (80-05-01) can be changed on the PBX side or selected in the parser settings (PBX Data Logger - Configuration - Modules - Parser - Setup)
Configuring PBX Data Logger
Our software should work in the TCP client mode. It means that our software will initiate connection with the PBX and the PBX will work as a server. Add one or several PBX IP addresses here (the IP address of the NEC SV8100). The port number should match the port that you have defined within the PBX (60010 in the example below).
Look also at settings for NEC SL1000.
|Description||Data type||Column name|
|Call duration (s)||integer||CALL_DURATION_S|
Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.