Logging and capturing data from Digi (Standard Stream Type).


This data is being extracted with help of the "Advanced Serial Data Logger" software only. It may not applicable for other software titles.

DescriptionData typeColumn name
WeightfloatWEIGHT
Net WeightfloatNET_WEIGHT
Unit WeightfloatUNIT_WEIGHT
QuantityintegerQUANTITY
ID codeintegerID
Tare WeightfloatTARE_WEIGHT
Total QuantityintegerQUANTITY_TOTAL
Measure Date/TimestringMEASURE_DATE_TIME
InventorystringINVENTORY
Part #stringPART_NO
Part namestringPART_NAME
Scale #stringSCALE_NO
Lot #stringLOT_NO

How to configure the logger for the Digi (Standard Stream Type).

1. Download and install the "Scale data parser" module.
2. Create or modify existing configuration.
3. Go to the "Modules - Query Parse Filter" page
4. Select the corresponding parser module.

The parser for Digi (Standard Stream Type)

Digi (Standard Stream Type) (unipsarser.dll)

Digi (Standard Stream Type) (unipsarser.dll)


The communication setting

Note: Your COM port settings above should match the RS232 settings on the scale.

How to write data from the Digi (Standard Stream Type) to a database.

Please, visit our tutorials section for examples.

How to capture data from USB scale or balance?

Usually the scale vendor provides a driver that can create a virtual COM port for the usb scale. Our serial data logger fully supposts virtual COM ports.

Go to Index page

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.