Logging and capturing data from Myweight HD Series SCI.0 Mode (HD-150,HD-300).


This data is being extracted with help of the "Advanced Serial Data Logger" software only. It may not applicable for other software titles.

DescriptionData typeColumn name
WeightfloatWEIGHT
Weight unitsstringWEIGHT_UNITS

How to configure the logger for the Myweight HD Series SCI.0 Mode (HD-150,HD-300).

1. Download and install the "Scale data parser" module.
2. Create or modify existing configuration.
3. Go to the "Modules - Query Parse Filter" page
4. Select the corresponding parser module.

The parser for Myweight HD Series SCI.0 Mode (HD-150,HD-300)

Myweight HD Series SCI.0 Mode (HD-150,HD-300) (unipsarser.dll)

Myweight HD Series SCI.0 Mode (HD-150,HD-300) (unipsarser.dll)


The communication setting

Note: Your COM port settings above should match the RS232 settings on the scale.

How to write data from the Myweight HD Series SCI.0 Mode (HD-150,HD-300) to a database.

Please, visit our tutorials section for examples.

How to capture data from USB scale or balance?

Usually the scale vendor provides a driver that can create a virtual COM port for the usb scale. Our serial data logger fully supposts virtual COM ports.

Go to Index page

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.