Logging and capturing data from TOR REY (EQB 100,EQB 200).


This data is being extracted with help of the "Advanced Serial Data Logger" software only. It may not applicable for other software titles.

DescriptionData typeColumn name
WeightfloatWEIGHT
Weight unitsstringWEIGHT_UNITS

How to configure the logger for the TOR REY (EQB 100,EQB 200).

1. Download and install the "Scale data parser" module.
2. Create or modify existing configuration.
3. Go to to the "Modules - Query Parse Filter" page
4. Select the corresponding parser module.

The parser for TOR REY (EQB 100,EQB 200)

TOR REY (EQB 100,EQB 200) (unipsarser.dll)

TOR REY (EQB 100,EQB 200) (unipsarser.dll)


The communication setting

Note: Your COM port settings above should match the RS232 settings on the scale.

How to write data from the TOR REY (EQB 100,EQB 200) to a database.

Please, visit our tutorials section for examples.

How to capture data from USB scale or balance?

Usually the scale vendor provides a driver that can create a virtual COM port for the usb scale. Our serial data logger fully supposts virtual COM ports.

Go to Index page

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.