The data in the main window (pic.1) can be displayed in two modes (pic.7):
| 1. | The data can be displayed before processing. Before processing the data I fully comply with that has been received. |
| 2. | The data can be displayed after processing. After processing the data can be modified depending on the parser. |
Note: Settings above are not available in Serial Printer Logger
Pic.7. Data view
Data view settings, that can be configured on the "Data view" tab:
| 1. | View characters with code - the program can interpret and decode received bytes as characters. You can select decoding mode for each characters range. If the range doesn't have the corresponding character, that's why these data can be displayed only in hexadecimal and decimal code. |
| 2. | You can set up data byte display users format. The directive %d shows to display an decimal code, the directive %x - hex code. You can set any framing characters before/after the user format. |
| 3. | Highlight data sent on screen - string with sent data will be highlighted by the set color. |
| 4. | You can select add date/time stamp to display output for data. |
|
