Navigation: Troubleshooting >
Data received as one long line
Problem: When trying to send data between the DNC and the CNC, the data is received as one long line.
This is most likely caused by an incorrect value in the "Program line ending" setting.
Send data from CNC
First, enable binary log files. For further information, please refer to "Logging". Try to send data from the CNC to the DNC server, then look at a file (see this file at binary mode with any hex viewer), and see what the CNC sends as linefeed characters. When you have determined the correct line feed character(s), change the port configuration to match this. For further information, please refer to "Program format".
Machine is using EIA code
Set machine to ASCII/ISO. Refer to your CNC's manual for further information.