OPC server

<< Click to Display Table of Contents >>

Navigation:  Program use > Configuration > Modules >

OPC server

Since the version 2.1.1 GPS Tracker Data Logger has an internal OPC server. It means that any OPC compatible client application can get data from GPS Tracker Data Logger without any additional software. To connect to the OPC server, you need the server ID and name (Fig. 5.2.1). Before using the OPC server on your computer, you should download and install the OPC Core Components Redistributable from www.opcfoundation.org (registration required).

 

opc-settings

Fig. 5.2.1 OPC server parameters

 

GPS Tracker Data Logger parses all incoming data to one or more variables, and an OPC client gets it (fig. 5.2.2). After connecting to the OPC server, you will get a list of all variables.

 

opc-item-names

Fig. 5.2.2 OPC server active items

 

Clients activity is showed on the "Active clients" tab. The top node is client, below is a group of items and connected items. By double-clicking, you can get detailed information about each node.

 

opc-client

Fig. 5.2.3 OPC server clients

 

GPS Tracker Data Logger creates new variables at "on-the-fly" mode. The GPS Tracker Data Logger starts without any variables and gets it only after first data had been received. If your client OPC will connect to the OPC server before than data had been processed, then it will get an empty list of variables, and your OPC client should poll the OPC server for updating list of variables. If your OPC client doesn't allow it, then you can pre-define all variables (fig.5.2.4). In this case, the OPC server will create these variables with empty values, immediate after starting, and your OPC client will get these names while connecting.

 

opc-predeclaration

Fig. 5.2.4 OPC server pre-declaration