Parser item name | Data type | Description |
---|---|---|
FULL_DATA_PACKET | String | One message from a data packet |
DATA_PACKET | String | Same as FULL_DATA_PACKET, but without data packet signatures (if exist) |
DATE_TIME_STAMP | DateTime | Datetime stamp |
DATA_SOURCE_ID | Integer | Data source ID |
DATA_SOURCE_NAME | String | Data source name |
DATA_SOURCE_FULL_NAME | String | Data source full name |
CLIENTID | Integer | Tracker's remote IP address and port |
IMEI | String | IMEI |
DEVICE_ID | String | Device ID |
TIME_UTC | DateTime | UTC time |
DATE_UTC | DateTime | UTC date |
TIMESTAMP_UTC | DateTime | UTC date and time |
TIMESTAMP | DateTime | Local date and time |
GPS_STATE | String | GPS status |
LATITUDE2 | String | Latitude (source) |
LATITUDE2_H | String | Latitude (hemisphere) |
LATITUDE | Float | Latitude 1) |
LATITUDE_DEG | String | Latitude (format: deg/min/sec) |
LONGITUDE2 | String | Longitude (source) |
LONGITUDE2_H | String | Longitude (hemisphere) |
LONGITUDE | Float | Longitude 1) |
LONGITUDE_DEG | String | Longitude (format: deg/min/sec) |
SPEED_KNOTS | Float | Speed (knots) |
SPEED | Float | Speed |
ANGLE | Float | Course |
RECORD_TYPE | String | Record type |
DI1 | Boolean | Digital input 1 |
DI2 | Boolean | Digital input 2 |
DI3 | Boolean | Digital input 3 |
DI4 | Boolean | Digital input 4 |
DI5 | Boolean | Digital input 5 |
STATE_ACC | Boolean | State: ACC |
DO1 | Boolean | Digital output 1 |
DO2 | Boolean | Digital output 2 |
STATE_POWER | Boolean | State: external power |
STATE_POWER_BATT | Boolean | State: battery power |
HDOP | Float | HDOP |
SATELLITES | Integer | Satellites |
CELLID | String | Cell ID |
TA | Float | TA |
RSSI | Float | RSSI |
AI1 | Float | Analog input 1 |
AI2 | Float | Analog input 2 |
TIN | Float | Temperature (int) |
1) The value is being calculated using the following formula:
d - degree
m - minutes
s - seconds
ms - milliseconds
If a longitude is west or a latitude is south, then the value is being multiplied by –1.