Send and receive files. This program can send and receive files both in the manual mode (under the control of the PC user) and automatically by receiving certain requests from the NC;
Multiple CNC. Working with several machines at a time if the system is built according to the radial scheme where each machine is connected to a separate serial port;
Drip feed. Our software supports drip feeding the large program to the machine control if the control supports it, and you have the proper handshaking. On most controls this is an optional feature, so yours may not support it;
Flexible configuration. Creating separate configurations for several machines (configuring port parameters, using software or hardware handshaking, configuring the format of files that are sent and received, restricting users' access to the program settings, choosing a separate folder with programs for each machine);
Automatic (server) mode. It is the most "advanced" and intellectual working mode of the program. In this mode, all the program actions are performed automatically without the PC user actions. When the program is launched, it is automatically switched to the mode for receiving information from the machine. When receiving some data, the program analyzes their contents and depending on the processed information responds in one way or another;
Creating back-ups. While transmitting files from the machine to the computer, sometimes it happens so that the transmitted file already exists on the disk in the specified folder;
Advanced remote commands processing. It is the most convenient way of transmitting information between the machine and the PC. Nearly any information can be transmitted in this form. Using this way, the NC operator can request the information (folder contents, files) from
the DNC Precision. The NC operator sends a small program to the DNC Precision with the requests, to which he would like to receive responses;
Files list. In the server mode the DNC Precision can process the request to send the list of files located in the folder specified in the machine options;
Reports. While transmitting and receiving files, processing requests in the automatic mode, it is sometimes necessary to inform the operator about the operation performance status. It can be done with the help of reports. The DNC Precision can generate the following
types of fully customizable reports: successful file receiving, failure request, and non-successful file receiving.
DNC Precision supplies a two cut down versions called Free Edition and Professional. Free version omits some of the advanced features found in the professional edition and is ideal for users who either want a low cost or free solution or are not interested in more advanced features. Read more here.