Tadiran Coral Flexicom 400. SMDR/CDR data format and connection settings
This data is being extracted with help of the "Advanced PBX Data Logger" software only. It may not applicable for other software titles.
Connect to the PBX using a terminal. The default parameters are:
Flow Control: None
Press <ENTER>. You'll be asked for a password. If you don't know it then contact your supplier.
In the main menu type "SMDR", select "0" (Control), then select again "0" (Update),
Now you'll be asked a series of questions. The first is the trunk groups you want to monitor, to let the default settings press <ENTER>.
You must be sure that the following settings are like the below ones:
ON_LINE 8_DIGIT_NPL: Y
ON_LINE EXTENDED_SMDR_INFORMATION: Y
SMDR_FREE_CHARGE (sec): 0
Now select fields that will be displayed in reports as: (1,2,3,6,8,9,10,11,12). Note that 4, 5 and 7 are missing because they are included in additional info.
Then go to the terminal settings typing "TERM" in the command line and specify the terminal number that you want to use. The PBX supports up to 4 terminals with numbers 0, 1, 2, 3. Usually 0 is used for programming and we would recommend to select another terminal.
You should change the terminal type to "COMPUTER".
|Description||Data type||Column name|
|Call duration (s)||integer||CALL_DURATION_S|
Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.