This program allows you to check the flow of data through
a computer's COM ports. As you can see from software name this application can work as serial port monitor. It supports full duplex mode, flexible
adjusting of parameters, output received data to file, automatic
and manual modes, free data source, serial device simulation,
plugins and sniffer mode. It is recommended for advanced users
and automation specialists.
What problems can be solved with Advanced Serial Port Monitor?
You can work without any effort with any equipment working
over any RS232/RS485/RS422 serial interface. You can serial port monitor
to monitor data exchange between serial devices, connected to serial port and any Windows
application. It may be as the measuring device, the industrial
controller or amateur radio station, and the other personal
computer connected through a z-modem cable. In any case you
will work with friendly and convenient interface, with the
Note! You won't have to install any additional hardware or software to analyze the protocol. All you need is just the Advanced Serial Port Monitor application installed on your computer!
Getting started is easy. Advanced Serial Port Monitor is ready!
After installation start Advanced Serial Port Monitor. Then
connect one device to a free serial port. Select the COM number
and click the "Open" button. Now, you can send data to your device
and receive data from them. You can change the program mode (terminal or sniffer) from the "Mode" menu.
(Step by step tutorial is here)