Alcatel OmniPCX Enterprise (OXE). SMDR/CDR data format and connection settings


This data is being extracted with help of the "Advanced PBX Data Logger" software only. It may not applicable for other software titles.

If you want to know what software release do you have on Alcatel OmniPCX Enterprise [OXE] please login using telnet, user mtcl, password mtcl an run the command siteid.

Alcatel OmniPcx Enterprise and 4400 (OXE)

The default address of the pbx system is 192.168.0.254 and the port for ftp is 21. You need to add the "FTP" data source and setup in the remote server address:port the following string: 192.168.0.254:21. Also you must use user mtcl and password mtcl.

Configuring PBX Data Logger

1. Create a new "File" data source.
2. Click "Actions - Add...".
3. Select "FTP" and configure connection with your FTP server.
4. Adjust read options.

Adding a new file data source for Alcatel OmniPCX Enterprise

Alcatel OmniPCX Enterprise. Data source selection dialog.

Alcatel OmniPCX Enterprise. Folders and files.
Alcatel OmniPCX Enterprise

Configuring FTP connection to Alcatel OmniPCX Enterprise
192.168.0.254
21
*.*

Adjusting read options for Alcatel OmniPCX Enterprise

Data items

DescriptionData typeColumn name
SubscriberstringEXT
Subscriber namestringFLAG4
CCNstringFLAG5
Call timedatetimeCALL_TIME
Call durationdatetimeCALL_DURATION
Call duration (s)integerCALL_DURATION_S
PhonestringDIALED_PHONE
Flag 1stringFLAG1
TrunkstringTRUNK
Flag 2stringFLAG2
Flag 3stringFLAG3

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.