SMDR, CDR data captured by Advanced PBX Data Logger from LG GDK-100
This data is being extracted with help of the "Advanced PBX Data Logger" software only. It may not applicable for other software titles.
| Description | Data type | Column name |
|---|
| Caller phone | string | CALLER_PHONE |
| Station | string | FLAG2 |
| External | string | EXT |
| Call duration | datetime | CALL_DURATION |
| Call duration (s) | integer | CALL_DURATION_S |
| Call time | datetime | CALL_TIME |
| Call type | string | CALL_TYPE |
| Direction | string | DIRECTION |
| Phone | string | DIALED_PHONE |
| Act | string | FLAG3 |
| Count | string | FLAG4 |
| Cost | float | COST |
| Account code | string | ACC |
Pinout and wiring
| PBX (9 pin) |
PC (9 pin) |
PC (25 pin) |
| 2 (TXD) |
2 (RXD) |
3 (RXD) |
| 3 (RXD) |
3 (TXD) |
2 (TXD) |
| 5 (GND) |
5 (GND) |
7 (GND) |
If the switch #2 on the MPB board is OFF then you should use a cable with the CTS wiret. Default COM port parameters: 8-N-1
To outputs call records you need to use the PGM62 program.
PROG BUTTON 2 - output on/off.
PROG. BUTTON 4 - output of incoming calls on/off.
PROG. BUTTON 6 - COM port baud rate
Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.
