bg

Haas Mill - DNC Software and CNC Settings

Download DNC Precision
DNC software for your Haas Mill machine.
Upload and download NC programs.

Haas Mill - DNC settings

The COM port settings to connect with

Serial port tab
Machine nameHaas Mill
Serial portCOM2 (or any free COM port)
Baud9600
Data bits7
ParityEven
Stop bits2
Data flow control tab
Use DTRFalse
Use RTSTrue
Require DSRFalse
Require CTSTrue
Set RTSTrue
Set DTRTrue
Software flowcontrolBoth
Xon char#11
Xoff char#13
Data exchange format tab
Format modeUniform
Format parametersProgram start: %
Program end: %
Line start:
Line end: #0D#0A
Skip lines:
Ignore characters: No characters for remove
Remove blank lines: No
Program name prefix: O
Program starting characters in the file: No
Program ending characters in the file: No

Null modem cable, without handshake
PC, 9pin, DB9M | CNC, 25pin, DB25
 

Null modem cable, with full handshake
PC, 9pin, DB25M | CNC, 25pin, DB25
 

Null modem cable, without handshake
PC, 25pin, DB25M | CNC, 25pin, DB25
 

Null modem cable, with full handshake
PC, 25pin, DB25M | CNC, 25pin, DB25
 

Go to Index page
Haas Lathe
Grundig
Heidenhain-CNC Pilot
Hinumerik 2000M

If you connected DNC Precision to another controller that is not on this list, please send us the information so we can add it to the list.