The COM port settings for Indramat system 200
Serial port tab| Machine name | Indramat system 200 |
| Serial port | COM2 (or any free COM port) |
| Baud | 9600 |
| Data bits | 7 |
| Parity | Even |
| Stop bits | 1 |
| Use DTR | False |
| Use RTS | True |
| Require DSR | False |
| Require CTS | True |
| Set RTS | False |
| Set DTR | False |
| Software flowcontrol | Both |
| Xon char | #11 |
| Xoff char | #13 |
| Format mode | Uniform |
| Format parameters | Program start: Program end: Line start: Line end: #0D#0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: O Program starting characters in the file: No Program ending characters in the file: No |
Straight cable, without handshake
PC, 9pin, DB9M | CNC, 25pin, DB25
Straight cable, without handshake
PC, 25pin, DB25M | CNC, 25pin, DB25