bg

CNC and DNC software settings for Phillips.

Download DNC Precision
These settings are for the DNC Precision software only. They may not work with other software.

Phillips - Maho 432 - Machine parameters

Set the following parameters on the machine

7762400
7772400
Drip-feed modeNot available

Set the following parameters on the PC

Serial port tab

Machine namePhillips - Maho 432
Serial portCOM2 (or any free COM port)
Baud2400
Data bits7
ParityEven
Stop bits2

Data flow control tab

Use DTRFalse
Use RTSTrue
Require DSRFalse
Require CTSTrue
Set RTSFalse
Set DTRFalse
Software flowcontrolBoth
Xon char#11
Xoff char#13

Data exchange format tab

Format modeUniform
Format parametersProgram start: %%
Program end: %%
Line start:
Line end: #0D#0A
Skip lines:
Ignore characters: No characters for remove
Remove blank lines: No
Program name prefix: O
Program starting characters in the file: No
Program ending characters in the file: No

Null modem cable, without handshake
PC, 9pin, DB9M | CNC, 25pin, DB25
 

Null modem cable, with full handshake
PC, 9pin, DB25M | CNC, 25pin, DB25
 

Null modem cable, without handshake
PC, 25pin, DB25M | CNC, 25pin, DB25
 

Null modem cable, with full handshake
PC, 25pin, DB25M | CNC, 25pin, DB25
 

Go to Index page
Omni Turn
Okuma - Okuma T
Pro Elesta
Siemens - Sinumerik 3M

If you connected DNC Precision to another controller that is not on this list, please send us the information so we can add it to the list.