bg

CNC and DNC software settings for Supermax CNC.

Download DNC Precision
These settings are for the DNC Precision software only. They may not work with other software.

Supermax CNC - DNC settings

Set the following parameters on the PC

Serial port tab

Machine nameSupermax CNC
Serial portCOM2 (or any free COM port)
Baud4800
Data bits7
ParityEven
Stop bits1

Data flow control tab

Use DTRFalse
Use RTSFalse
Require DSRFalse
Require CTSFalse
Set RTSTrue
Set DTRTrue
Software flowcontrolBoth
Xon char#11
Xoff char#13

Data exchange format tab

Format modeUniform
Format parametersProgram start: %
Program end: %
Line start:
Line end: #0D#0A#0A
Skip lines: ;
Ignore characters: No characters for remove
Remove blank lines: No
Program name prefix: :
Program starting characters in the file: No
Program ending characters in the file: No

Null modem cable, without handshake
PC, 9pin, DB9M | CNC, 25pin, DB25
 

Null modem cable, with full handshake
PC, 9pin, DB25M | CNC, 25pin, DB25
 

Null modem cable, without handshake
PC, 25pin, DB25M | CNC, 25pin, DB25
 

Null modem cable, with full handshake
PC, 25pin, DB25M | CNC, 25pin, DB25
 

Go to Index page
Sodick ET21
Siemens - Sinumerik 8T
Takumi V8, V11 - Vertical machining center
Tanaka

If you connected DNC Precision to another controller that is not on this list, please send us the information so we can add it to the list.