Logging and capturing data from Bilanciai Scale

This data is being extracted with help of the "Advanced Serial Data Logger" software only. It may not applicable for other software titles.

DescriptionData typeColumn name
Weight unitsstringWEIGHT_UNITS

For Bilanciai scales, the RS232 communication parameters are typically:

Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None

These settings are common for many Bilanciai scale models, but it's always a good idea to double-check the specific manual for your scale model to ensure accuracy.

How to configure the logger for the Bilanciai Scale.

1. Download and install the "Scale data parser" module.
2. Create or modify existing configuration.
3. Go to the "Modules - Query Parse Filter" page
4. Select the corresponding parser module.

The parser for Bilanciai Scale

Bilanciai Scale (unipsarser.dll)

Bilanciai Scale (unipsarser.dll)

The communication setting

Note: Your COM port settings above should match the RS232 settings on the scale.

How to write data from the Bilanciai Scale to a database.

Please, visit our tutorials section for examples.

How to capture data from USB scale or balance?

Usually the scale vendor provides a driver that can create a virtual COM port for the usb scale. Our serial data logger fully supposts virtual COM ports.

Go to Index page
Avery Scale
BVS-TSK5 Balance
Cardinal Scale
Combics Scale
Denver Instrument Scale

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.