Logging and capturing data from Kern & Sohn Gmbh Scale, Balance


This data is being extracted with help of the "Advanced Serial Data Logger" software only. It may not applicable for other software titles.

DescriptionData typeColumn name
WeightfloatWEIGHT
Weight unitsstringWEIGHT_UNITS

Kern PBS/PBJ scale

The scale can provide data when you press the "PRINT" button manually. You can also request data from the scale automatically by sending the command "PRINT<CR>". In our logger, replace with the hexadecimal code #0D.

How to configure the logger for the Kern & Sohn Gmbh Scale, Balance.

1. Download and install the "Scale data parser" module.
2. Create or modify existing configuration.
3. Go to the "Modules - Query Parse Filter" page
4. Select the corresponding parser module.

The parser for Kern & Sohn Gmbh Scale, Balance

Kern & Sohn Gmbh Scale, Balance (unipsarser.dll)

Kern & Sohn Gmbh Scale, Balance (unipsarser.dll)


The communication setting

Note: Your COM port settings above should match the RS232 settings on the scale.

How to write data from the Kern & Sohn Gmbh Scale, Balance to a database.

Please, visit our tutorials section for examples.

How to capture data from USB scale or balance?

Usually the scale vendor provides a driver that can create a virtual COM port for the usb scale. Our serial data logger fully supposts virtual COM ports.

Go to Index page
Gemplus Scale
Ian Fellows CSW-20 Series Scale
Kern & Sohn Gmbh Scales and Balances
Lexus (Matrix)
Magellan RS232 Scale Interface

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.