Logging and capturing data from Measuretek (PS-101,PS-102,PS-103,PS-104,PS-105).

This data is being extracted with help of the "Advanced Serial Data Logger" software only. It may not applicable for other software titles.

DescriptionData typeColumn name
Weight unitsstringWEIGHT_UNITS

How to configure the logger for the Measuretek (PS-101,PS-102,PS-103,PS-104,PS-105).

1. Download and install the "Scale data parser" module.
2. Create or modify existing configuration.
3. Go to the "Modules - Query Parse Filter" page
4. Select the corresponding parser module.

The parser for Measuretek (PS-101,PS-102,PS-103,PS-104,PS-105)

Measuretek (PS-101,PS-102,PS-103,PS-104,PS-105) (unipsarser.dll)

Measuretek (PS-101,PS-102,PS-103,PS-104,PS-105) (unipsarser.dll)

The communication setting

Note: Your COM port settings above should match the RS232 settings on the scale.

How to write data from the Measuretek (PS-101,PS-102,PS-103,PS-104,PS-105) to a database.

Please, visit our tutorials section for examples.

How to capture data from USB scale or balance?

Usually the scale vendor provides a driver that can create a virtual COM port for the usb scale. Our serial data logger fully supposts virtual COM ports.

Go to Index page

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.