Logging and capturing data from Ohaus Pioneer Balance.

This data is being extracted with help of the "Advanced Serial Data Logger" software only. It may not applicable for other software titles.

DescriptionData typeColumn name
User IDstringUSER_ID
Balance IDstringBALANCE_ID
Project IDstringPROJ_ID
Weight unitsstringWEIGHT_UNITS

COM port settings

Note 1: Check the Instruction Manual and see the RS232 menu option on your scale.

Note 2: Your COM port settings should match the RS232 settings on the scale.

COM Port Number: Select the port to which your instrument is connected.
Baud rate: 600, 1200, 2400, 4800, 9600 or 19200 (check the scale's RS232 menu)
Data bits: 7 or 8
Parity: Odd or Even.
Flow control: hardware and software flow control is disabled.

How to configure the logger for the Ohaus Pioneer Balance.

1. Download and install the "Scale data parser" module.
2. Create or modify existing configuration.
3. Go to the "Modules - Query Parse Filter" page
4. Select the corresponding parser module.

The parser for Ohaus Pioneer Balance

Ohaus Pioneer Balance (unipsarser.dll)

Ohaus Pioneer Balance (unipsarser.dll)

The communication setting

Note: Your COM port settings above should match the RS232 settings on the scale.

How to write data from the Ohaus Pioneer Balance to a database.

Please, visit our tutorials section for examples.

How to capture data from USB scale or balance?

Usually the scale vendor provides a driver that can create a virtual COM port for the usb scale. Our serial data logger fully supposts virtual COM ports.

Go to Index page

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.