Logging and capturing data from Setra Scale

This data is being extracted with help of the "Advanced Serial Data Logger" software only. It may not applicable for other software titles.

DescriptionData typeColumn name
Weight unitsstringWEIGHT_UNITS

How to configure the logger for the Setra Scale.

1. Download and install the "Scale data parser" module.
2. Create or modify existing configuration.
3. Go to the "Modules - Query Parse Filter" page
4. Select the corresponding parser module.

The parser for Setra Scale

Setra Scale (unipsarser.dll)

Setra Scale (unipsarser.dll)

The communication setting

Note: Your COM port settings above should match the RS232 settings on the scale.

How to write data from the Setra Scale to a database.

Please, visit our tutorials section for examples.

How to capture data from USB scale or balance?

Usually the scale vendor provides a driver that can create a virtual COM port for the usb scale. Our serial data logger fully supposts virtual COM ports.

Go to Index page
Setra (500C,2000C,5000C,12000C)
Setra (EasyCount,QuickCount)
Soehnle B3C Serenite (protocol F501) Scale
Soehnle B3C Serenite (protocol Multipoint 2000) Scale
Soehnle B3C Serenite (protocol Saie) Scale

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.