Logging and capturing data from Soehnle B3C Serenite (protocol Tisa) Scale

This data is being extracted with help of the "Advanced Serial Data Logger" software only. It may not applicable for other software titles.

DescriptionData typeColumn name
Weight unitsstringWEIGHT_UNITS

How to configure the logger for the Soehnle B3C Serenite (protocol Tisa) Scale.

1. Download and install the "Scale data parser" module.
2. Create or modify existing configuration.
3. Go to the "Modules - Query Parse Filter" page
4. Select the corresponding parser module.

The parser for Soehnle B3C Serenite (protocol Tisa) Scale

Soehnle B3C Serenite (protocol Tisa) Scale (unipsarser.dll)

Soehnle B3C Serenite (protocol Tisa) Scale (unipsarser.dll)

The communication setting

Note: Your COM port settings above should match the RS232 settings on the scale.

How to write data from the Soehnle B3C Serenite (protocol Tisa) Scale to a database.

Please, visit our tutorials section for examples.

How to capture data from USB scale or balance?

Usually the scale vendor provides a driver that can create a virtual COM port for the usb scale. Our serial data logger fully supposts virtual COM ports.

Go to Index page
Soehnle B3C Serenite (protocol Multipoint 2000) Scale
Soehnle B3C Serenite (protocol Saie) Scale
Systec (Flintec Protocol)
Systec (SysTec Protocol)
TOR REY (EQB 100,EQB 200)

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.