Logging and capturing data from Systec (SysTec Protocol)

This data is being extracted with help of the "Advanced Serial Data Logger" software only. It may not applicable for other software titles.

DescriptionData typeColumn name
Stability flagstringSTABILITY
Weight unitsstringWEIGHT_UNITS

How to configure the logger for the Systec (SysTec Protocol).

1. Download and install the "Scale data parser" module.
2. Create or modify existing configuration.
3. Go to the "Modules - Query Parse Filter" page
4. Select the corresponding parser module.

The parser for Systec (SysTec Protocol)

Systec (SysTec Protocol) (unipsarser.dll)

Systec (SysTec Protocol) (unipsarser.dll)

The communication setting

Note: Your COM port settings above should match the RS232 settings on the scale.

How to write data from the Systec (SysTec Protocol) to a database.

Please, visit our tutorials section for examples.

How to capture data from USB scale or balance?

Usually the scale vendor provides a driver that can create a virtual COM port for the usb scale. Our serial data logger fully supposts virtual COM ports.

Go to Index page
Soehnle B3C Serenite (protocol Tisa) Scale
Systec (Flintec Protocol)
TOR REY (EQB 100,EQB 200)
TREE (HRB 103,HRB 602,HRB 1002,HRBE)
Thompson Scale (5511)

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.