Logging and capturing data from Thompson Scale (5511)

This data is being extracted with help of the "Advanced Serial Data Logger" software only. It may not applicable for other software titles.

DescriptionData typeColumn name

How to configure the logger for the Thompson Scale (5511).

1. Download and install the "Scale data parser" module.
2. Create or modify existing configuration.
3. Go to the "Modules - Query Parse Filter" page
4. Select the corresponding parser module.

The parser for Thompson Scale (5511)

Thompson Scale (5511) (unipsarser.dll)

Thompson Scale (5511) (unipsarser.dll)

The communication setting

Note: Your COM port settings above should match the RS232 settings on the scale.

How to write data from the Thompson Scale (5511) to a database.

Please, visit our tutorials section for examples.

How to capture data from USB scale or balance?

Usually the scale vendor provides a driver that can create a virtual COM port for the usb scale. Our serial data logger fully supposts virtual COM ports.

Go to Index page
TOR REY (EQB 100,EQB 200)
TREE (HRB 103,HRB 602,HRB 1002,HRBE)
Transcell Digital Indicator (TI-1500, TI-500E Plus, TI-500 Plus)
Weigh-tronix Scale
Western M2000 (DF2000 Mode) Scale

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.