Logging and capturing data from Transcell Digital Indicator (TI-1500, TI-500E Plus, TI-500 Plus)
This data is being extracted with help of the "Advanced Serial Data Logger" software only. It may not applicable for other software titles.
Description | Data type | Column name |
Weight | float | WEIGHT |
Weight units | string | WEIGHT_UNITS |
How to configure the logger for the Transcell Digital Indicator (TI-1500, TI-500E Plus, TI-500 Plus).
1. Download and install the "Scale data parser" module.
2. Create or modify existing configuration.
3. Go to the "Modules - Query Parse Filter" page
4. Select the corresponding parser module.
Transcell Digital Indicator (TI-1500, TI-500E Plus, TI-500 Plus) (unipsarser.dll)
Transcell Digital Indicator (TI-1500, TI-500E Plus, TI-500 Plus) (unipsarser.dll)
Note: Your COM port settings above should match the RS232 settings on the scale.
How to write data from the Transcell Digital Indicator (TI-1500, TI-500E Plus, TI-500 Plus) to a database.
Please, visit our tutorials section for examples.
How to capture data from USB scale or balance?
Usually the scale vendor provides a driver that can create a virtual COM port for the usb scale. Our serial data logger fully supposts virtual COM ports.
Go to Index page
TREE (HRB 103,HRB 602,HRB 1002,HRBE)
Thompson Scale (5511)
Weigh-tronix Scale
Western M2000 (DF2000 Mode) Scale
Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.