Logging and capturing data from TREE (HRB 103,HRB 602,HRB 1002,HRBE)

This data is being extracted with help of the "Advanced Serial Data Logger" software only. It may not applicable for other software titles.

DescriptionData typeColumn name
Weight unitsstringWEIGHT_UNITS

Transmissions Settings

Mode: Simplex
Asynchronous Serial
Baud Rate: 9600
Data Bit: 8
Parity Bit: None
Stop Bit: 1
Data Format: ASCII

How to configure the logger for the TREE (HRB 103,HRB 602,HRB 1002,HRBE).

1. Download and install the "Scale data parser" module.
2. Create or modify existing configuration.
3. Go to the "Modules - Query Parse Filter" page
4. Select the corresponding parser module.

The parser for TREE (HRB 103,HRB 602,HRB 1002,HRBE)

TREE (HRB 103,HRB 602,HRB 1002,HRBE) (unipsarser.dll)

TREE (HRB 103,HRB 602,HRB 1002,HRBE) (unipsarser.dll)

The communication setting

Note: Your COM port settings above should match the RS232 settings on the scale.

How to write data from the TREE (HRB 103,HRB 602,HRB 1002,HRBE) to a database.

Please, visit our tutorials section for examples.

How to capture data from USB scale or balance?

Usually the scale vendor provides a driver that can create a virtual COM port for the usb scale. Our serial data logger fully supposts virtual COM ports.

Go to Index page
Systec (SysTec Protocol)
TOR REY (EQB 100,EQB 200)
Thompson Scale (5511)
Transcell Digital Indicator (TI-1500, TI-500E Plus, TI-500 Plus)
Weigh-tronix Scale

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.