Logging and capturing data from Western M2000 (DF2000 Mode) Scale
This data is being extracted with help of the "Advanced Serial Data Logger" software only. It may not applicable for other software titles.
Description | Data type | Column name |
Weight | float | WEIGHT |
Weight units | string | WEIGHT_UNITS |
How to configure the logger for the Western M2000 (DF2000 Mode) Scale.
1. Download and install the "Scale data parser" module.
2. Create or modify existing configuration.
3. Go to the "Modules - Query Parse Filter" page
4. Select the corresponding parser module.
Western M2000 (DF2000 Mode) Scale (unipsarser.dll)
Western M2000 (DF2000 Mode) Scale (unipsarser.dll)
Note: Your COM port settings above should match the RS232 settings on the scale.
How to write data from the Western M2000 (DF2000 Mode) Scale to a database.
Please, visit our tutorials section for examples.
How to capture data from USB scale or balance?
Usually the scale vendor provides a driver that can create a virtual COM port for the usb scale. Our serial data logger fully supposts virtual COM ports.
Go to Index page
Transcell Digital Indicator (TI-1500, TI-500E Plus, TI-500 Plus)
Weigh-tronix Scale
Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.