Set the following parameters on Yaskawa Yasnac 2000G
Parameter 59
X set at 3
Parameter 59
Z defines a baud rate
Select the Z values from the list
110 baud rate
37327
300 baud rate
54734
600 baud rate
27598
1200 baud rate (recommended)
13774
2400 baud rate (recommended)
7118
4800 baud rate (recommended)
54733
9600 baud rate (recommended)
54733
Set the following parameters on the PC for Yasnac 2000G
Serial port tab
Machine name
Yaskawa - Yasnac 2000G
Serial port
COM2 (or any free COM port)
Baud
1200
Data bits
7
Parity
Even
Stop bits
1
Data flow control tab
Use DTR
False
Use RTS
False
Require DSR
False
Require CTS
False
Set RTS
True
Set DTR
True
Software flowcontrol
Both
Xon char
#11
Xoff char
#13
Data exchange format tab
Format mode
Uniform
Format parameters
Program start: %% Program end: %% Line start: Line end: #0D#0A Skip lines: ; Ignore characters: No characters for remove Remove blank lines: No Program name prefix: : Program starting characters in the file: No Program ending characters in the file: No
Program start: % Program end: % Line start: Line end: #0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: O Program starting characters in the file: No Program ending characters in the file: No
Set the following parameters on Yaskawa Yasnac MX 1
6026 (baud rate)
0001 1000 (2400)
6028 (baud rate)
0001 1000 (2400)
Change following bits in the parameter #6000 only
bit 7
1 (ISO format)
Change following bits in the parameter #6003 only
bit 5
1
bit 1
1
Change following bits in the parameter #6021 only
bit 6
0
bit 5
0
bit 4
0
bit 1
0
Change following bits in the parameter #6022 only
bit 1
1
bit 0
1
Set the following parameters on the PC for Yasnac MX 1
Serial port tab
Machine name
Yaskawa - Yasnac MX-1
Serial port
COM2 (or any free COM port)
Baud
2400
Data bits
7
Parity
Even
Stop bits
2
Data flow control tab
Use DTR
False
Use RTS
True
Require DSR
False
Require CTS
True
Set RTS
True
Set DTR
True
Software flowcontrol
Both
Xon char
#11
Xoff char
#13
Data exchange format tab
Format mode
Uniform
Format parameters
Program start: % Program end: % Line start: Line end: #0D#0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: O Program starting characters in the file: No Program ending characters in the file: No
Program start: % Program end: % Line start: Line end: #0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: O Program starting characters in the file: No Program ending characters in the file: No
