bg

Viking - DNC Software and CNC Settings

Download DNC Precision
DNC software for your Viking machine.
Upload and download NC programs.

Viking 100 - Machine parameters

Configure computer for Viking 100

Serial port tab
Machine nameViking 100
Serial portCOM2 (or any free COM port)
Baud2400
Data bits7
ParityEven
Stop bits2
Data flow control tab
Use DTRFalse
Use RTSTrue
Require DSRFalse
Require CTSTrue
Set RTSFalse
Set DTRFalse
Software flowcontrolNone
Xon char#11
Xoff char#13
Data exchange format tab
Format modeUniform
Format parametersProgram start:
Program end:
Line start:
Line end: #0D#0A
Skip lines:
Ignore characters: No characters for remove
Remove blank lines: No
Program name prefix: O
Program starting characters in the file: No
Program ending characters in the file: No

Null modem cable, without handshake
PC, 9pin, DB9M | CNC, 25pin, DB25
 

Null modem cable, with full handshake
PC, 9pin, DB25M | CNC, 25pin, DB25
 

Null modem cable, without handshake
PC, 25pin, DB25M | CNC, 25pin, DB25
 

Null modem cable, with full handshake
PC, 25pin, DB25M | CNC, 25pin, DB25
 

Viking 150T - NC settings

Set the following parameters on the PC for 150T

Serial port tab
Machine nameViking 150T
Serial portCOM2 (or any free COM port)
Baud2400
Data bits7
ParityEven
Stop bits2
Data flow control tab
Use DTRFalse
Use RTSTrue
Require DSRFalse
Require CTSTrue
Set RTSFalse
Set DTRFalse
Software flowcontrolNone
Xon char#11
Xoff char#13
Data exchange format tab
Format modeUniform
Format parametersProgram start:
Program end:
Line start:
Line end: #0D#0A
Skip lines:
Ignore characters: No characters for remove
Remove blank lines: No
Program name prefix: O
Program starting characters in the file: No
Program ending characters in the file: No

Null modem cable, without handshake
PC, 9pin, DB9M | CNC, 25pin, DB25
 

Null modem cable, with full handshake
PC, 9pin, DB25M | CNC, 25pin, DB25
 

Null modem cable, without handshake
PC, 25pin, DB25M | CNC, 25pin, DB25
 

Null modem cable, with full handshake
PC, 25pin, DB25M | CNC, 25pin, DB25
 

Go to Index page
Victor Taichung - V630
Traub - Traub system TX-8-k
Wenzler MTA-6
Yaskawa - Yasnac 2000G

If you connected DNC Precision to another controller that is not on this list, please send us the information so we can add it to the list.