Server software for iTrack GTLT3, iTrack MT-1, iTrack AS2000, iTrack AS5000 GPS Trackers, Vehicle trackers, AVL units
iTrack GTLT3, iTrack MT-1, iTrack AS2000, iTrack AS5000
| Parser item name | Data type | Description |
|---|
| FULL_DATA_PACKET | String | One message from a data packet |
| DATA_PACKET | String | Same as FULL_DATA_PACKET, but without data packet signatures (if exist) |
| DATE_TIME_STAMP | DateTime | Datetime stamp |
| DATA_SOURCE_ID | Integer | Data source ID |
| DATA_SOURCE_NAME | String | Data source name |
| DATA_SOURCE_FULL_NAME | String | Data source full name |
| CLIENTID | Integer | Tracker's remote IP address and port |
| IMEI | String | IMEI |
| DEVICE_ID | String | Device ID |
| REPORT_TYPE | String | Report type |
| TIME_UTC | DateTime | UTC time |
| DATE_UTC | DateTime | UTC date |
| TIMESTAMP_UTC | DateTime | UTC date and time |
| TIMESTAMP | DateTime | Local date and time |
| STATE | String | Device state |
| ALARM_POWER | Boolean | Alarm: power |
| ALARM_BATTERY | Boolean | Alarm: battery low |
| STATE_POWER | Boolean | State: power |
| STATE_IGNITION | Boolean | State: ignition |
| ALARM_OVER_SPEED | Boolean | Alarm: over speed |
| ALARM_GEO_IN | Boolean | Alarm: geofence in |
| ALARM_GEO_OUT | Boolean | Alarm: geofence out |
| MCC | String | MCC |
| MNC | String | MNC |
| LAC | String | LAC |
| CELLID | String | Cell ID |
| GSM | Integer | GSM level |
| SATELLITES | Integer | Satellites |
| VIN | Integer | Battery (%) |
| RECORD_TYPE | String | Record type |
| GPS_STATE | String | GPS state |
| GPS_STATE_NAME | String | GPS fix mode name |
| LATITUDE2 | String | Latitude (source) |
| LATITUDE2_H | String | Latitude (hemisphere) |
| LATITUDE | Float | Latitude 1) |
| LATITUDE_DEG | String | Latitude (format: deg/min/sec) |
| LONGITUDE2 | String | Longitude (source) |
| LONGITUDE2_H | String | Longitude (hemisphere) |
| LONGITUDE | Float | Longitude 1) |
| LONGITUDE_DEG | String | Longitude (format: deg/min/sec) |
| SPEED | Float | Speed |
| ANGLE | Float | Course |
1) The value is being calculated using the following formula:
d - degree
m - minutes
s - seconds
ms - milliseconds
If a longitude is west or a latitude is south, then the value is being multiplied by –1.