Server software for Storozh GPS, Storozh GLONASS, Storozh Std, Storozh Pro GPS Trackers, Vehicle trackers, AVL units
Storozh GPS, Storozh GLONASS, Storozh Std, Storozh Pro
| Parser item name | Data type | Description |
|---|
| FULL_DATA_PACKET | String | One message from a data packet |
| DATA_PACKET | String | Same as FULL_DATA_PACKET, but without data packet signatures (if exist) |
| DATE_TIME_STAMP | DateTime | Datetime stamp |
| DATA_SOURCE_ID | Integer | Data source ID |
| DATA_SOURCE_NAME | String | Data source name |
| DATA_SOURCE_FULL_NAME | String | Data source full name |
| CLIENTID | Integer | Tracker's remote IP address and port |
| IMEI | String | IMEI |
| DEVICE_ID | String | Device ID |
| DEVICE_ID2 | String | Device ID 2 |
| FIRMWARE | Word | Firmware |
| STATE | Word | Status |
| ACC | Float | Accelerometer |
| STATE_ANTENNA | Word | State: antenna |
| FLAG1 | Word | LAC |
| FLAG2 | Word | Cell ID |
| TIN | Integer | Temperature |
| GSM_LEVEL | Word | GSM level |
| FLAG3 | Word | Archived data |
| AI1 | Integer | Analog input 1 |
| AI2 | Integer | Analog input 2 |
| AI3 | Integer | Analog input 3 |
| AI4 | Integer | Analog input 4 |
| DO1 | Boolean | Digital output 1 |
| DO2 | Boolean | Digital output 2 |
| DO3 | Boolean | Digital output 3 |
| DO4 | Boolean | Digital output 4 |
| DO5 | Boolean | Digital output 5 |
| DO6 | Boolean | Digital output 6 |
| DO7 | Boolean | Digital output 7 |
| DO8 | Boolean | Digital output 8 |
| VEXT | Float | External power |
| VIN | Float | Battery power |
| GPS_STATE | Integer | GPS state |
| TIME_UTC | Integer | UTC time |
| DATE_UTC | Integer | UTC date |
| TIMESTAMP_UTC | DateTime | UTC time |
| LATITUDE | Float | Latitude 1) |
| LATITUDE_DEG | String | Latitude (format: deg/min/sec) |
| LONGITUDE | Float | Longitude 1) |
| LONGITUDE_DEG | String | Longitude (format: deg/min/sec) |
| ALTITUDE | Float | Altitude |
| SPEED | Float | Speed |
| ANGLE | Float | Course |
| HDOP | Float | HDOP |
| SATELLITES | Integer | Satellites |
| TIMESTAMP | DateTime | Local date and time |
1) The value is being calculated using the following formula:
d - degree
m - minutes
s - seconds
ms - milliseconds
If a longitude is west or a latitude is south, then the value is being multiplied by –1.