Server software for Teltonika MTB100 GPS Trackers, Vehicle trackers, AVL units
Teltonika MTB100
| Parser item name | Data type | Description |
|---|
| FULL_DATA_PACKET | String | One message from a data packet |
| DATA_PACKET | String | Same as FULL_DATA_PACKET, but without data packet signatures (if exist) |
| DATE_TIME_STAMP | DateTime | Datetime stamp |
| DATA_SOURCE_ID | Integer | Data source ID |
| DATA_SOURCE_NAME | String | Data source name |
| DATA_SOURCE_FULL_NAME | String | Data source full name |
| CLIENTID | Integer | Tracker's remote IP address and port |
| TIMESTAMP_UTC | DateTime | Time stamp (UTC) |
| TIMESTAMP | DateTime | Time stamp |
| DEVICE_ID | String | Device ID |
| IMEI | String | IMEI |
| LATITUDE | Float | Latitude 1) |
| LONGITUDE | Float | Longitude 1) |
| LATITUDE_DEG | String | Latitude (format: deg/min/sec) |
| LONGITUDE_DEG | String | Longitude (format: deg/min/sec) |
| SPEED | Integer | Speed |
| ALTITUDE | Integer | Altitude |
| ANGLE | Integer | Course |
| FUEL | Float | Fuel |
| SATELLITES | Word | Satellites |
| VIN | Float | Battery power |
| VEXT | Float | External power |
| GSM | Word | GSM |
| LAC | String | LAC |
| CELLID | String | Cell ID |
| IBUTTON | String | iButton |
| TIN | Float | Temperature (int) |
| TOUT | Float | Temperature (out) |
| DI1 | Boolean | Digital input 1 |
| DI2 | Boolean | Digital input 2 |
| DI3 | Boolean | Digital input 3 |
| DI4 | Boolean | Digital input 4 |
| DO1 | Boolean | Digital output 1 |
| DO2 | Boolean | Digital output 2 |
| AI1 | Integer | Analog input 1 |
| AI2 | Integer | Analog input 2 |
| AI3 | Integer | Analog input 3 |
| AI4 | Integer | Analog input 4 |
| T3 | Float | Temperature 3 |
| T4 | Float | Temperature 4 |
| PRIORITY | Integer | Priority code |
| PRIORITY_STR | String | Priority |
| EVENTIO_ID | Integer | EventIO ID |
| TOTAL_IO | Integer | Total IO |
| MNC | Integer | Mobile Operator Code |
| ACC | Integer | Accelerometer |
1) The value is being calculated using the following formula:
d - degree
m - minutes
s - seconds
ms - milliseconds
If a longitude is west or a latitude is south, then the value is being multiplied by –1.