Bridgeport - DNC Software and CNC Settings

DNC software for your Bridgeport machine.
Upload and download NC programs.

Bridgeport - Boss 3 - Machine parameters

The COM port settings for Bridgeport Boss 3

Serial port tab

Machine name	Bridgeport - Boss 3
Serial port	COM2 (or any free COM port)
Baud	4800
Data bits	7
Parity	Even
Stop bits	1

Data flow control tab

Use DTR	False
Use RTS	True
Require DSR	False
Require CTS	True
Set RTS	False
Set DTR	False
Software flowcontrol	Both
Xon char	#11
Xoff char	#13

Data exchange format tab

Format mode	Uniform
Format parameters	Program start: Program end: Line start: Line end: #0D#0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: O Program starting characters in the file: No Program ending characters in the file: No

Null modem cable, without handshake

PC, 9pin, DB9M | CNC, 25pin, DB25

Null modem cable, with full handshake

PC, 9pin, DB25M | CNC, 25pin, DB25

Null modem cable, without handshake

PC, 25pin, DB25M | CNC, 25pin, DB25

Null modem cable, with full handshake

PC, 25pin, DB25M | CNC, 25pin, DB25

Bridgeport - Boss 4 - Machine parameters

Computer settings to connect with Boss 4

Serial port tab

Machine name	Bridgeport - Boss 4
Serial port	COM2 (or any free COM port)
Baud	4800
Data bits	7
Parity	Even
Stop bits	1

Data flow control tab

Use DTR	False
Use RTS	True
Require DSR	False
Require CTS	True
Set RTS	False
Set DTR	False
Software flowcontrol	Both
Xon char	#11
Xoff char	#13

Data exchange format tab

Format mode	Uniform
Format parameters	Program start: Program end: Line start: Line end: #0D#0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: O Program starting characters in the file: No Program ending characters in the file: No

Null modem cable, without handshake

PC, 9pin, DB9M | CNC, 25pin, DB25

Null modem cable, with full handshake

PC, 9pin, DB25M | CNC, 25pin, DB25

Null modem cable, without handshake

PC, 25pin, DB25M | CNC, 25pin, DB25

Null modem cable, with full handshake

PC, 25pin, DB25M | CNC, 25pin, DB25

Bridgeport - Boss 5 - DNC settings

Computer settings to connect with Boss 5

Serial port tab

Machine name	Bridgeport - Boss 5
Serial port	COM2 (or any free COM port)
Baud	4800
Data bits	7
Parity	Even
Stop bits	1

Data flow control tab

Use DTR	False
Use RTS	True
Require DSR	False
Require CTS	True
Set RTS	False
Set DTR	False
Software flowcontrol	Both
Xon char	#11
Xoff char	#13

Data exchange format tab

Format mode	Uniform
Format parameters	Program start: Program end: Line start: Line end: #0D#0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: O Program starting characters in the file: No Program ending characters in the file: No

Null modem cable, without handshake

PC, 9pin, DB9M | CNC, 25pin, DB25

Null modem cable, with full handshake

PC, 9pin, DB25M | CNC, 25pin, DB25

Null modem cable, without handshake

PC, 25pin, DB25M | CNC, 25pin, DB25

Null modem cable, with full handshake

PC, 25pin, DB25M | CNC, 25pin, DB25

Bridgeport - Boss 6 - DNC settings

Computer settings to connect with Boss 6

Serial port tab

Machine name	Bridgeport - Boss 6
Serial port	COM2 (or any free COM port)
Baud	4800
Data bits	7
Parity	Even
Stop bits	1

Data flow control tab

Use DTR	False
Use RTS	True
Require DSR	False
Require CTS	True
Set RTS	False
Set DTR	False
Software flowcontrol	Both
Xon char	#11
Xoff char	#13

Data exchange format tab

Format mode	Uniform
Format parameters	Program start: Program end: Line start: Line end: #0D#0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: O Program starting characters in the file: No Program ending characters in the file: No

Null modem cable, without handshake

PC, 9pin, DB9M | CNC, 25pin, DB25

Null modem cable, with full handshake

PC, 9pin, DB25M | CNC, 25pin, DB25

Null modem cable, without handshake

PC, 25pin, DB25M | CNC, 25pin, DB25

Null modem cable, with full handshake

PC, 25pin, DB25M | CNC, 25pin, DB25

Bridgeport - Boss 8 - DNC settings

Configure computer for Bridgeport Boss 8

Serial port tab

Machine name	Bridgeport - Boss 8
Serial port	COM2 (or any free COM port)
Baud	4800
Data bits	7
Parity	Even
Stop bits	1

Data flow control tab

Use DTR	False
Use RTS	True
Require DSR	False
Require CTS	True
Set RTS	False
Set DTR	False
Software flowcontrol	Both
Xon char	#11
Xoff char	#13

Data exchange format tab

Format mode	Uniform
Format parameters	Program start: Program end: Line start: Line end: #0D#0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: O Program starting characters in the file: No Program ending characters in the file: No

Null modem cable, without handshake

PC, 9pin, DB9M | CNC, 25pin, DB25

Null modem cable, with full handshake

PC, 9pin, DB25M | CNC, 25pin, DB25

Null modem cable, without handshake

PC, 25pin, DB25M | CNC, 25pin, DB25

Null modem cable, with full handshake

PC, 25pin, DB25M | CNC, 25pin, DB25

Bridgeport - Boss 9 - NC settings

Set the following parameters on the PC for Boss 9

Serial port tab

Machine name	Bridgeport - Boss 9
Serial port	COM2 (or any free COM port)
Baud	4800
Data bits	7
Parity	Even
Stop bits	1

Data flow control tab

Use DTR	False
Use RTS	True
Require DSR	False
Require CTS	True
Set RTS	False
Set DTR	False
Software flowcontrol	Both
Xon char	#11
Xoff char	#13

Data exchange format tab

Format mode	Uniform
Format parameters	Program start: Program end: Line start: Line end: #0D#0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: O Program starting characters in the file: No Program ending characters in the file: No

Null modem cable, without handshake

PC, 9pin, DB9M | CNC, 25pin, DB25

Null modem cable, with full handshake

PC, 9pin, DB25M | CNC, 25pin, DB25

Null modem cable, without handshake

PC, 25pin, DB25M | CNC, 25pin, DB25

Null modem cable, with full handshake

PC, 25pin, DB25M | CNC, 25pin, DB25

Go to Index page
Bosch alpha 3
Bosch CC320
Brother - TC-32 A
Burny 1400

If you connected DNC Precision to another controller that is not on this list, please send us the information so we can add it to the list.