bg

Eckelmann - CNC and DNC software settings

Download DNC Precision
These settings are for the DNC Precision software only. They may not work with other software.

Eckelmann - Viewstar 750 - NC settings

Set the following parameters on Eckelmann Viewstar 750

Baud rate4800
Data bits7
ParityE (Even)
Stop bits2
Flow controlXon/Xoff

Set the following parameters on the PC for Viewstar 750

Serial port tab
Machine nameEckelmann - Viewstar 750
Serial portCOM2 (or any free COM port)
Baud4800
Data bits7
ParityEven
Stop bits2
Data flow control tab
Use DTRFalse
Use RTSFalse
Require DSRFalse
Require CTSFalse
Set RTSTrue
Set DTRTrue
Software flowcontrolBoth
Xon char#11
Xoff char#13
Data exchange format tab
Format modeData transmit
Format parametersProgram start:
Program end:
Line start:
Line end:
Skip lines:
Ignore characters: No characters for remove
Remove blank lines: No
Program name prefix:
Program starting characters in the file: No
Program ending characters in the file: No

Null modem cable, without handshake
PC, 9pin, DB9M | CNC, 25pin, DB25
 

Null modem cable, with full handshake
PC, 9pin, DB25M | CNC, 25pin, DB25
 

Null modem cable, without handshake
PC, 25pin, DB25M | CNC, 25pin, DB25
 

Null modem cable, with full handshake
PC, 25pin, DB25M | CNC, 25pin, DB25
 

Go to Index page
Digma CNC
Dialog-4
Ellison Technologies - Puma VT900
Fadal VMC

If you connected DNC Precision to another controller that is not on this list, please send us the information so we can add it to the list.