Set the following parameters on the machine
| 771 | 1 |
| 772 (XON/XOFF enabled) | 3 |
| 773 (buffer size) | 60 |
| 775 (stop bits) | 0 |
| 776 (baud rate) | 2400 |
| 777 (baud rate) | 2400 |
| 782 | 1 |
| 785 | 1 |
| 786 | 4800 |
Set the following parameters on the PC
Serial port tab
| Machine name | Maho - CNC 432 - 1000 |
| Serial port | COM2 (or any free COM port) |
| Baud | 2400 |
| Data bits | 7 |
| Parity | Even |
| Stop bits | 2 |
Data flow control tab
| Use DTR | False |
| Use RTS | True |
| Require DSR | False |
| Require CTS | True |
| Set RTS | False |
| Set DTR | False |
| Software flowcontrol | None |
| Xon char | #11 |
| Xoff char | #13 |
Data exchange format tab
| Format mode | Uniform |
| Format parameters | Program start: Program end: ^ Line start: Line end: #0D#0A Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: O Program starting characters in the file: No Program ending characters in the file: No |
Null modem cable, without handshake
PC, 9pin, DB9M | CNC, 25pin, DB25
Null modem cable, with full handshake
PC, 9pin, DB25M | CNC, 25pin, DB25
Null modem cable, without handshake
PC, 25pin, DB25M | CNC, 25pin, DB25
Null modem cable, with full handshake
PC, 25pin, DB25M | CNC, 25pin, DB25