Set the following parameters on the PC for
Serial port tab| Machine name | Mikron CNC |
| Serial port | COM2 (or any free COM port) |
| Baud | 38400 |
| Data bits | 8 |
| Parity | None |
| Stop bits | 1 |
| Use DTR | False |
| Use RTS | False |
| Require DSR | False |
| Require CTS | False |
| Set RTS | True |
| Set DTR | True |
| Software flowcontrol | None |
| Xon char | #11 |
| Xoff char | #13 |
| Format mode | Uniform |
| Format parameters | Program start: Program end: Line start: Line end: Skip lines: Ignore characters: No characters for remove Remove blank lines: No Program name prefix: Program starting characters in the file: No Program ending characters in the file: No |