Ericsson Businessphone 50-250 (CIL4HOTEL Format). SMDR/CDR data format and connection settings
This data is being extracted with help of the "Advanced PBX Data Logger" software only. It may not applicable for other software titles.
Ericsson BusinessPhone 50-250
All settings below are applicable for model 50-250, version 4.0+.
Flexible CIL format: Selecting
6006 - Device type: 7 (unspecified terminal/printer)
6007 - Character set: 0 (no conversion)
6009 - IOU (except CPU-D4) Baud rate: 10 (2400 Baud)
6009 - IOU (CPU-D4) Baud rate: 10 (2400 Baud)
6009 - SMU (except CPU-D4) Baud rate: 8 (1200 Baud)
6009 - SMU (CPU-D4) Baud rate: 10 (2400 Baud)
6011 - Autoselect allowed: Yes (optional)
6017 - Mode selection for serial interface - should be RS-232
6101 - Set year month day to : YYMMDD
6102 - Set day of week: 1 - Sunday, 7 - Saturday
6103 - Set hour minute second: HHMMSS
6104 - 12h mode, display - Set it to N for 24 mode
6201 - Log internal calls? - Yes
6202 - Log incoming calls? - Yes
6203 - Block log output? - Yes
6204 - Digits to log - Set it to NO
6205 - Bar outgoing calls for guest - Yes if you want to stop guest making calls while the pbx memory is full. Usefull for hotels. (optional)
6301 - Log outgoing calls? - Yes
6302 - Log duration time - Set it to 0 because you can configure it in the application.
6303 - Log minimum meter pulses - Should set it to 0
6304 - Bar outgoing calls? - Yes if you want to stop the outgoing calls while the calls storage if out of order and the pbx memory is full. (optional)
6305 - Dialed number: suppress - Set it to 0 unless you want to strip the last n digits from the dialed number for security reasons.
6306 - Log dialed numbers beginning with 0 - Yes.
6307 - Log dialed numbers beginning with 1 - Yes.
6308 - Log dialed numbers beginning with 2 - Yes.
6309 - Log dialed numbers beginning with 3 - Yes.
6310 - Log dialed numbers beginning with 4 - Yes.
6311 - Log dialed numbers beginning with 5 - Yes.
6312 - Log dialed numbers beginning with 6 - Yes.
6313 - Log dialed numbers beginning with 7 - Yes.
6314 - Log dialed numbers beginning with 8 - Yes.
6315 - Log dialed numbers beginning with 9 - Yes.
6332 - Log minimum cost - Set it 0
6403 - CIL4HOTEL.
6404/6407 - Lines per page - Set it to 0
6402 - Automatic I/O activation - Set it to 1 minute. (0 means disabled)
6701 - I/O Port - Value ppiii where pp is board position and iii is individual number of a V24 (IO unit) port.
6702 - Lines/page - Set it to 0
|Description||Data type||Column name|
|Call duration (s)||integer||CALL_DURATION_S|
|Sent access code||string||FLAG6|
Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.