Panasonic KX-TDE100. SMDR/CDR data format and connection settings
This data is being extracted with help of the "Advanced PBX Data Logger" software only. It may not applicable for other software titles.
Printing Out SMDR Using LAN Port
Systems Affected: KX-TDE 100/200/600, and KX-NCP 500/1000
1. Go to 11.1 Maintenance → Main.
2. Set Port to LAN.
3. Under Print Information select which items you would like to display in the SMDR Printout.
3.1 Date format: MM-DD-YY.
3.2 Time format: 24H.
4. Click on SMDR Options tab.
5. Note the default SMDR Port Number and Password. (These can be changed at you own discretion, but for this document we will use the default settings.)
Configuring PBX Data Logger
Our software should work in the TCP client mode. It means that our software will initiate connection with the PBX and the PBX will work as a server. Add one or several PBX IP addresses here (the IP address of the Panasonic PBX). The port number should match the port that you have defined within the PBX (2300 in the example below).
6. Configure our software to send password to the PBX.
By default, the Panasonic NCP/TDE system requires a username/password (default: SMDR/PCCSMDR) to connect to the TCP/IP feed.
You must activate the corresponding data query plugin, click the "Setup" button and specify the password:
Note: this feature is available in the Trial, Professional and Enterprise versions only.
Activating SMDR records for all calls
On the "SMDR options" page just enable condition codes to enable call logging for all stages "RC" and "AN". "RC" stands for received and "AN" for answered.
|Description||Data type||Column name|
|Call time only||datetime||CALL_TIME2|
|Call date and time||datetime||CALL_TIME|
|DID name and number||string||DNIS|
|Call duration (s)||integer||CALL_DURATION_S|
Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.