LG GDK-100 SMDR setup and CDR format

This page shows how to get call records out of the LG GDK-100 into Advanced PBX Data Logger: the connection settings, the parser to select and the 13 fields the logger extracts for reports or a database. The settings apply to our logger; other call accounting software may expect a different configuration.

Quick facts

Pinout and wiring

If the switch #2 on the MPB board is OFF then you should use a cable with the CTS wiret. Default COM port parameters: 8-N-1
To outputs call records you need to use the PGM62 program.
PROG BUTTON 2 - output on/off.
PROG. BUTTON 4 - output of incoming calls on/off.
PROG. BUTTON 6 - COM port baud rate

Configuring a COM port

The COM port number should match the number in your system. You can check the correct port number in Devices Manager → Ports.

1. Add a new configuration with the RS232 data source (if you didn't it before).

2. Select the COM port and configure the communication settings for your PBX corresponding to your PBX settings.

Selecting the correct parser for LG GDK-100

LG GDK-100

LG GDK-100

Data items

Sample record

As delivered by the system; phone numbers, names and public addresses are masked.

8201  102 02    00:10 11/02/05 12:52 I RING 00:05
8202  110 02    02:22 11/02/05 12:52 t                   ** 
8202  111 02    00:25 11/02/05 12:52 t                   ** 

Reports and a database

Once records arrive, the logger writes them to a text file or to any ODBC database in real time, or hands them to the PBX Reports utility for manual, scheduled and e-mailed reports with a built-in web server. See exporting call log data to a database for the database setup.

Related LG systems

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.