Toshiba Strata DK SMDR formats

Advanced PBX Data Logger includes 4 parsers for Toshiba Strata DK systems. This page gathers them in one place. For each system you will find how the call records reach the logger, the parser to select, and the 50 fields in total that these parsers extract for PBX Reports or a database. The settings apply to our logger; other call accounting software may expect a different configuration.

Systems on this page

• Toshiba Strata DK 14,40,424 · Serial or TCP, 16 fields
• Toshiba Strata DK 2 · Serial or TCP, 9 fields
• Toshiba Strata DK 240,280 · Serial or TCP, 15 fields
• Toshiba Strata DK 56 · Serial or TCP, 10 fields

Connecting the logger

Add a data source in PBX Data Logger that matches the interface named in each section: RS232 for a serial SMDR port, TCP client when the PBX accepts connections, TCP server when the PBX pushes records to the logger, or FTP for systems that write CDR files. Then open Modules → Query Parse Filter → Data query, click Setup and select the parser named in the section. The general steps are shown on the SMDR listener page; every other supported system is listed on the supported PBX index.

Toshiba Strata DK 14,40,424

Parser: Toshiba Strata DK 14,40,424
Connection: Serial printer port or LAN, whichever the system uses for SMDR output. The record layout identifies the format.
Fields extracted: 16

Settings from the manufacturer's documentation

Taken from Toshiba Strata DK 14 40 424. Values are those stated in the documentation; confirm them against your firmware release.

Switching SMDR output on, as documented

1. Program SMDR with Program 60; the SMDR port is active only on the PIOU/PIOUS with the lowest Program 03 code (41, 42 or 43), or on the RSIU/RSIS port set to code x2 in Program 76-1.

Record format notes

• A header line with the date and 'Every Fifty Call Records and at Midnight' is printed each time 50 call records accumulate and at midnight.
• A leading '*' marks a call disconnected by the CO's Calling Party Control (CPC) or Automatic Release signal.
• Special dial digits print as letters: Tone = T, Long pause = L, Flash = F, Pause = P.
• Special record labels replace the normal call type: MSS for DISA/external-call-forward calls answered after the threshold, DISA for trunk-to-trunk DISA CO access, MODM for calls to the remote maintenance modem (Station #19).
• Each line of output ends with a CR/LF pair.

Data items: Toshiba Strata DK 14,40,424

Sample record

As delivered by the system; phone numbers, names and public addresses are masked.

A021  8514      12:25 00:04;53                     157xxxxxxxx
                                                                                                                                                  
*021D 3303 3303 12:26 00:00;31 00;13         *650xxxxxxx*8512*
                                                                                                                                                  
*020D 3304 3304 12:28 00:00;34 00;12         *703xxxxxxx*8568*
                                                                                                                                                  

Toshiba Strata DK 2

Parser: Toshiba Strata DK 2
Connection: Serial printer port or LAN, whichever the system uses for SMDR output. The record layout identifies the format.
Fields extracted: 9

Data items: Toshiba Strata DK 2

Sample record

As delivered by the system; phone numbers, names and public addresses are masked.

001   16 09:40 00:01;56
                                                                                                                                                                                         
005   27 09:41 00:01;23                          197xxxxxxxx#
                                                                                                                                                   
010   32 09:41 00:00;34                          121xxxxxxxxx
                                                                                                                                                   

Toshiba Strata DK 240,280

Parser: Toshiba Strata DK 240,280
Connection: Serial printer port or LAN, whichever the system uses for SMDR output. The record layout identifies the format.
Fields extracted: 15

Communication settings

PIOU/PIOUS port

Baud: 300 or 1200 (depends on the SW1 switch on the PCB).
Data bits: 8
Stop bits: 1
Parity: None

RSIU/RSIS port

Program 76-1X-Y. Assigns each installed RSIU port to a function. Where X identifies the RSIU port No. l-4, and Y identifies the port type (SMDR Y=3).
Program 76-2X-Z. Assigns each installed RSIU port to operate at a specified transmission rate. Where X identifies the RSIU Port No. l-4 and Z identifies the RSIU/RSIS/RMDS port transmission rate in bits-per-second (bps), E.g. 9600.
Baud: 1200, 2400, 4800 or 9600.
Data bits: 8
Stop bits: 1
Parity: None

PBX Settings

Program 60 Item l - Selects Caller ID, ANI and DNIS or Account Code to be sent out the SMDR Port.
Item 2 - Selects the minimum duration (1.O or 10 seconds) of calls that will be registered by SMDR. Any call that lasts less than the set time will not be recorded.
Item 3 - Selects the records of outgoing calls or outgoing and incoming calls to be printed.
Item 4 - Selects the digit length of Account Codes (4 to 15 digits).
Item 5 - Allows only long distance call records to be printed.
Item 6 - DISA security code.
Item 7 - Credit card calling digit length.

You may find more info in "Strata DK280 Programming Manual"

Data items: Toshiba Strata DK 240,280

Sample record

As delivered by the system; phone numbers, names and public addresses are masked.

 024   287      16:36 00:00;31                        P253xxxx
 001   274      16:37 00:08;36 00;09
 023   281      16:37 00:01;22                        P253xxxx

Toshiba Strata DK 56

Parser: Toshiba Strata DK 56
Connection: Serial printer port or LAN, whichever the system uses for SMDR output. The record layout identifies the format.
Fields extracted: 10

Data items: Toshiba Strata DK 56

Sample record

As delivered by the system; phone numbers, names and public addresses are masked.

12  244 15:56 00:00;11 00;04  201
12  201 15:56 00:00;11
13  224 15:57 00:01;29

Reports and a database

Once records arrive, the logger writes them to a text file or to any ODBC database in real time, or hands them to the PBX Reports utility for manual, scheduled and e-mailed reports with a built-in web server. See exporting call log data to a database for the database setup.

Related Toshiba Strata DK systems with their own setup pages

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.