Nortel Meridian (3 rows,v25). SMDR/CDR data format and connection settings

This data is being extracted with help of the "Advanced PBX Data Logger" software only. It may not applicable for other software titles.

Meridian-1 11C pinout and wiring

PBX (25 pin) PC (25 pin) PC (9 pin)
1 1  
2 3 2
3 2 3
4+5 4+5 7+8
7 7 5
6+8+20 6+8+20 6+1+4

You may also using a standard modem cable with all wires. In this case you can use the following communication parameters: 8-N-1 with hardware flow control.

If you use the pinout above the parameters will be: 7-N-1 without flow control.

Configuring a COM port

The COM port number should match the number in your system. You can check the correct port number in Devices Manager → Ports.

1. Add a new configuration with the RS232 data source (if you didn't it before).

RS232 Interface

2. Select the COM port and configure the communication settings for your PBX corresponding to your PBX settings.

RS232 or COM port settings for (none)
Port flow control settings (none)

Selecting the correct parser for Nortel Meridian (3 rows,v25)

Parser Selection For Nortel Meridian (3 rows,v25) - SMDR/CDR call logging & accounting

Nortel Meridian (3 rows,v25)

Nortel Meridian (3 rows,v25)

Data items

DescriptionData typeColumn name
Record typestringCALL_TYPE
Record type namestringRECORD_TYPE_NAME
Record NostringFLAG1
Customer NostringFLAG2
Call timedatetimeCALL_TIME
Call durationdatetimeCALL_DURATION
Call duration (s)integerCALL_DURATION_S
Call directionstringDIRECTION
Originating Tenant NumberstringFLAG5
Terminating Tenant NumberstringFLAG6
Caller phonestringCALLER_PHONE
Digit type identifierstringFLAG7
Phone (w/o city code)stringDIALED_PHONE2

Interested in reports for PBX usage?

With our PBX Reports utility, you get manual, scheduled, and email reporting options, a built-in web server, and other functionalities. Set up your call accounting system for Nortel Meridian (3 rows,v25). Look here

Want PBX call logs in a database?

Real-time capture and export of SMDR or CDR data to your database is a standard feature of the logger.. Follow this link

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.