Siemens HiPath 3550 SMDR setup and formats (v1 and v2)

This page covers the Siemens Siemens Hipath-3550 v2 and Siemens Hipath-3550 variants in Advanced PBX Data Logger. Each section gives the connection settings, the parser to select and the fields the logger extracts for reports or a database; where the setup steps are the same for every variant they are given once. The settings apply to our logger; other call accounting software may expect a different configuration.

Quick facts

Variants on this page

• Siemens Hipath-3550 v2 · Serial printer port or LAN, whichever the system uses for SMDR output, 11 fields
• Siemens Hipath-3550 · Serial printer port or LAN, whichever the system uses for SMDR output, 12 fields

Settings from the manufacturer's documentation

Taken from smdr pinout. Values are those stated in the documentation; confirm them against your firmware release.

Siemens Hipath-3550 v2

Parser: Siemens Hipath-3550 v2
Connection: Serial printer port or LAN, whichever the system uses for SMDR output. The record layout identifies the format.
Fields extracted: 11

Data items: Siemens Hipath-3550 v2

Sample record

As delivered by the system; phone numbers, names and public addresses are masked.

17.10.0512:36:06  1   118     00:00:06069                                  2                          0 3       \par
17.10.0512:37:39  1   116     00:00:020xxxx                                2                          0 3       \par
17.10.0512:39:51 51   111     00:01:262xxxxx                               2                          0 1       \par

Siemens Hipath-3550

Parser: Siemens Hipath-3550
Connection: Serial printer port or LAN, whichever the system uses for SMDR output. The record layout identifies the format.
Fields extracted: 12

Data items: Siemens Hipath-3550

Connecting the logger

Add a data source in PBX Data Logger that matches the interface named in the section for your variant (RS232, TCP client, TCP server or FTP), then open Modules → Query Parse Filter → Data query, click Setup and select the parser named there.

Siemens programming software

Siemens HiPath 3000 systems (3350, 3500, 3550, 3700, 3750, 3800) are programmed with HiPath 3000 Manager E, which comes from Siemens, Unify or your dealer, not from AGG Software. Call data recording is switched on there; PBX Data Logger receives the records.

Reports and a database

Once records arrive, the logger writes them to a text file or to any ODBC database in real time, or hands them to the PBX Reports utility for manual, scheduled and e-mailed reports with a built-in web server. See exporting call log data to a database for the database setup.

Related Siemens systems

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.