NEC Univerge SV8100 (General Overseas Format). SMDR/CDR data format and connection settings

This data is being extracted with help of the "Advanced PBX Data Logger" software only. It may not applicable for other software titles.

SV8100

PROG 10-12-01/02: confirm your IP address given for the CPU
PROG 35-01-01: Output Port Type (select: LAN)
PROG 10-20-05: SMDR Output Port (input: 60010)
PROG 14-01-06: SMDR Print-Out (checked)

Repeat for all the trunks necessary

Reboot SV8100

Call logging via LAN

Open your favorite browser.
Navigate to the http://192.168.1.220/ (replace the IP address with the address of your PBX)
Login using the installer name and password (by default: sltech/12345678).
Change the settings below.
Apply the changed settings.

Note 1: The SMDR format (35-01-08) depends on the selected parser type (PBX Data Logger → Configuration → Modules → Parser)

Note 2: The SMDR date format (80-05-01) can be changed on the PBX side or selected in the parser settings (PBX Data Logger → Configuration → Modules → Parser → Setup)

Configuring PBX Data Logger

Our software should work in the TCP client mode. It means that our software will initiate connection with the PBX and the PBX will work as a server. Add one or several PBX IP addresses here (the IP address of the NEC SV8100). The port number should match the port that you have defined within the PBX (60010 in the example below).

60010

Look also at settings for NEC SL1000.

Data items

Description	Data type	Column name
Record number	string	FLAG1
Call type	string	CALL_TYPE
Direction	string	DIRECTION
Call time	datetime	CALL_TIME
CO	string	TRUNK
Call duration	datetime	CALL_DURATION
Call duration (s)	integer	CALL_DURATION_S
Ext	string	EXT
Dialed phone	string	DIALED_PHONE
Caller phone	string	CALLER_PHONE
Account	string	ACC
Ring	datetime	RING

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.