Default SMDR ports and connection settings by PBX

One row per supported system: how it hands over call records, the port it uses by default, and the parser to select in Advanced PBX Data Logger. Follow the system name for the settings to make on the PBX itself, the fields the parser extracts and, where the manufacturer documents them, the programming login and factory address.

Ports and connection modes

51 systems. A port shown here is the manufacturer's default; on a system that has been reconfigured, read the value from the PBX rather than from this table.

If the port is not the one listed

A PBX that refuses the connection, or accepts it and sends nothing, is usually set to a different port or has SMDR output switched off entirely. Each setup page names the setting that switches it on and the menu it lives in. Where a system offers both a serial port and a LAN connection, the logger can use either; the setup page says which the parser expects.

Vendor guides

Panasonic systems
NEC systems
Siemens and Unify systems
Avaya systems
Samsung systems
Mitel systems
Alcatel-Lucent systems
All supported PBX systems

Note: Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies.